Angular Contact Ball Bearings

Contact Now

These opposing raceways are designed to carry thrust load in one direction. NTN can preload the bearings at the factory so that the correct load will develop once the bearing is put into service. The bearings in this series are assembled with a specific internal clearance, so that they will have a specified contact angle under load.

single row angular contact ball bearings can accommodate axial loads in one direction only. This type of bearing is typically adjusted against a second bearing. Their bearing rings have an upper and a lower shoulder and are non-separable.

NTN 6004lu Bearing

EPR 8 30.2 kN
1/8 NPT 1150 r/min

0.669 Inch | 17 Millimeter x 1.575 Inch | 40 Millimeter x 0.689 Inch | 17.5 Millimeter GENERAL BEARING 455503 Angular Contact Ball Bearings

1-1/4" Bore 1; 0.013
TRB-2031;PDL051 Thrust Roller Bearin

0.591 Inch | 15 Millimeter x 1.378 Inch | 35 Millimeter x 0.626 Inch | 15.9 Millimeter GENERAL BEARING 455502 Angular Contact Ball Bearings

4.63 Inch | 117.602 Pillow Block
Pillow Block Non-expansion

0.472 Inch | 12 Millimeter x 1.26 Inch | 32 Millimeter x 0.626 Inch | 15.9 Millimeter GENERAL BEARING 455501 Angular Contact Ball Bearings

TIMKEN 0 Inch | 0 Millimete
0.75 Inch | 19.05 Mi 2.717 Inch | 69.012

0.591 Inch | 15 Millimeter x 1.654 Inch | 42 Millimeter x 0.748 Inch | 19 Millimeter CONSOLIDATED BEARING 5302 B Angular Contact Ball Bearings

Pillow Block Cast Iron
1 Piece Solid Non-expansion
1/11